CLEANING SOLVENT, SOLVENT
FOR POLYMER RESINS
Coatings and paints
Polyurethanes, Epoxies, Polyesters, Bis-GMA
DISSOLVES RIGID POLYURETHANE FOAMS
BEFORE AND AFTER POLYMERISATION
CMR SOLVENT SUBSTITUTE
NO HAZARD OR WARNING PICTOGRAM
(CLP 1272 GHS Regulation)
Not classified flammable
Guaranteed free of hazardous, harmful,
irritating or sensitising substance
Slightly volatile
Reduced consumption
SMP optimisation
Solvent Management Plan
(IED Directive)
ODP 0
GWP 0
TYPICAL PHYSICAL-CHEMICAL PROPERTIES
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
Appearance |
Visual |
Clear |
- |
Colour |
Visual |
Yellow |
- |
Smell |
Olfactory |
Slight, mango |
- |
Density at 25°C |
NF EN ISO 12185 |
1090 |
kg/m3 |
Refraction index |
ISO 5661 |
1.4450 |
- |
Freezing point |
ISO 3016 |
-15 |
°C |
Water solubility |
- |
>40 |
% |
Kinematic viscosity at 40°C |
NF EN 3104 |
1.7 |
mm²/s |
Acid index |
EN 14104 |
<1 |
mg(KOH)/g |
Iodine index |
NF EN 14111 |
0 |
gI2/100g |
Water content |
NF ISO 6296 |
<1 |
% |
Residue after evaporation |
NF T 30-084 |
<0.1 |
% |
PERFORMANCE CHARACTERISTICS |
|||
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
KB index |
ASTM D 1133 |
>180 |
- |
Evaporation speed |
- |
>3 |
hours |
Evaporation rate nBuAC=1 |
NF T 30.30 |
1.4 |
Quotient |
Evaporation rate DEE=1 |
DIN 53.170 |
nm |
Quotient |
Surface tension at 20°C |
ISO 6295 |
27.7 |
dyne/cm |
Copper blade corrosion 100 h at 40°C |
ISO 2160 |
1b |
Rating |
Aniline point |
ISO 2977 |
nm |
°C |
FIRE SAFETY CHARACTERISTICS |
|||
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
Flashpoint (closed cup) |
NF EN 22719 |
90 |
°C |
Autoignition point |
ASTM E 659 |
>200 |
°C |
Lower Explosive Limit |
NF EN 1839 |
2.6 |
% (volume) |
Upper Explosive Limit |
NF EN 1839 |
28.5 |
% (volume) |
Explosive, oxidising agent, flammable, highly or extremely flammable substance content |
CLP Regulation |
0 |
% |
TOXICOLOGICAL CHARACTERISTICS |
|||
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
Anisidine index |
NF ISO 6885 |
<2 |
- |
Peroxide index |
NF ISO 3960 |
<5 |
meq(O2)/kg |
TOTOX (anisidine index+2x peroxide index) |
- |
nm |
- |
CMR, irritant and corrosive substance content |
CLP Regulation |
0 |
% |
Residual methanol content from transesterification |
GC-MS |
0 |
% |
ENVIRONMENTAL CHARACTERISTICS |
|||
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
Water hazard |
WGK Germany |
1 without hazard for water |
class |
Primary CEC biodegradability 21 days at 25°C |
L 33 T82 |
>80 |
% |
OECD easy biodegradability 301 A over 28 days Disappearance of COD |
ISO 7827 |
>80 |
% |
OECD easy and ultimate biodegradability 301 D over 28 days Biodegradation at 67 days |
MITI amended |
>70 |
% |
Bioaccumulation n-octanol water sharing index |
OECD 107 |
-1.35 |
KOW log |
Steam pressure at 20°C |
- |
<0.1 |
hPa |
VOC content (Volatile Organic Compounds) |
- |
Unmeasured carbon content |
% |
Total halogen content (Chlorine Fluorine Bromine) |
Bomb calorimeter GC MS |
0 |
% |
Benzene content |
LPCH |
0 |
% |
Aromatic solvent content |
LPCH |
0 |
% |
Environmentally-hazardous substance content |
- |
0 |
% |
Content of compounds with GWP |
- |
0 |
% |
Content of compounds with ODP |
- |
0 |
% |
Carbon assessment, life cycles analysis. |
ISO 14040 |
6.40 |
Kg carbon equivalent |
nm: not measured or cannot be measured
Safety precautions: if this product disintegrates and requires reconditioning, do not use metal packaging.
PRESENTATIONS
GRV 1000 L |
Drum 200 L |
Can 20 L
|
Looking for another product?
Discover our entire range by clicking on the photo
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.